-
XMC-PCIeStor, High Speed PCIe Quad M.2 SSD Adapter, 9303
The 9303 is an air or conduction cooled, extended temperature XMC card with 4 M.2 SSD sites for multi-terabyte storage. Onboard Gen2 PCI Express (PCIe) switch connects one 4-lane upstream PCIe port to four 1-lane downstream ports. -
XMC-PCIeStor High Speed PCIe Triple M.2 SSD Adapter, 9302
The 9302 is a VITA 42.3 XMC adapter card with three M.2 SSD sites. Each M.2 site supports one lane of PCIe Gen 2 connectivity at 5 Gb/s per lane when a Gen 2 or 3 capable M.2 PCIe card is used. -
XMC-PCIeStor, High Speed PCIe Single SSD Adapter, 9301
The 9301 is a VITA 42.3 XMC adapter card / mezzanine storage module with a single M.2 SSD site. The M.2 site supports up to 4 lanes of PCIe Gen 2 connectivity at 5 Gb/s per lane when a Gen 2 or 3 capable... -
4 x GB ETH NIC
The S82-P6 is equipped with an M.2 PCIe x4 socket, suitable for a high speed NVMe type SSD module, with a maximum capacity of 2TB as of current, sufficient for installation of an operating system and also data storage. -
3U OpenVPX Dual Drive Carrier, 5332-33
Build a storage array with Elma’s 3U OpenVPX storage modules featuring high single slot data storage capacity. The 5332 & 5333 hold 2 on-board SATA drives and can be part of a multi-slot storage array with 5330/31 or 5335/36 controller cards. -
XMCDisk, SATA Adapter, 9292
The 9292 XMCDisk is a rugged mezzanine storage solution designed for applications requiring high speed operation with high capacities and zero slot usage. -
PMC Storage with Removable and Fixed Drives, 927x
The 927x family supports one or two rugged CompactFlash drives (CFI or CFII). MTTR is significantly reduced by using sockets that allow easy removal while clamps hold the drives in place during normal operation. -
6U VME Network Attached Storage with RAID
Modern defense net-centric architectures communicate via Ethernet links. Network attached storage solutions eliminate the need for local storage, reducing SWaP-C & improving data protection. It leverages existing networks to access critical data. -
PMCStor, Conduction Cooled, Secure-Erase & Write-Protection
The Secure PMCStor is a secure solid state storage solution that provides secure erasure and/or write-protection of sensitive data in PMC form factor. It provides a hardware-based implementation of both data erasure and write protect. -
PMCStor, Conduction Cooled, 9245 & 9246
The ccPMCStor is a PMC form factor, conduction-cooled mass storage device which provides a storage solution for both air and and conduction cooled systems in extended temperature applications. -
M12 Mezzanine for SC4/5 M.2 NVMe SSD PCIe x4, 4 x M12 Gbe
The SCL-RHYTHM is a mezzanine card for EKF SC4/5 CPU boards, with a socket for PCI Express® M.2 NVMe SSD PCIe x4 mass storage module, and four independent M12 Gigabit Ethernet controllers for universal networking. Suitable for M.2 S1-S5 / D1-D5. -
Carrier Board for Hilscher Fieldbus
SF1-STUDIO is optimized for Hilscher real-time Ethernet & fieldbus modules. Many popular protocols are supported. Ethernet, mezzanine modules are available for EtherCAT, EtherNet/IP, Open-Modbus/TCP, POWERLINK, PROFINET IO, Sercos, and VARAN. -
IC-EM2-XMCa, Removable mass storage XMC module
The IC-EM2-XMCa is an XMC storage module dedicated to add mass storage capability to IC Single Board Computers (SBCs) based on VPX, VME and cPCI form-factors. -
6U OpenVPX Three Drive Storage Module Family, 565x
The 565x family of 6U VPX Storage Modules provide the ability to access up to three 2.5” solid state hard drives in a single slot. Conduction and air cooled versions bring high capacity storage array capability to rugged environments. -
6U OpenVPX Quad Drive Storage Module, 5630
The 5632 & 5633 support multi-terabyte storage in one 6U slot with capacities current solid state drive technologies. Four on-board SATA drives connect via the backplane via SATA controller to create a high capacity multi-slot storage array. -
6U OpenVPX Front Removable Storage Module, 5655
The 5655 is a 6U OpenVPX SATA storage module with dual front removable storage drives. It is designed to provide SATA I/O access for dual 2.5” drives via OpenVPX backplane data plane connections. -
6U CompactPCI Three Drive Storage Module, 605x
The 6050 6U CompactPCI Storage Module provides access to three 2.5” SSDs in a single slot. Provides direct access to each drive via front panel or RTM. Can be integrated in a multi-slot storage array via external SATA RAID controller. -
M.2 SATA SSD Carrier
SD4-SWEEP fits into any CompactPCI® Serial peripheral slot that is PCIe enabled. Hardware RAID operation is supported, running with an enhanced ARM-based processor to offload the host CPU. -
6U CompactPCI Front Removable Storage Module, 6055
The 6055 is a 6U cCPI SATA storage module with 2 independently, front removable storage drives. Can be integrated in multi-slot storage array using an external RAID controller. -
3U VPX: Air Cooled 2 x SATA ports to BP, 2 X 256GB MLC SSDs
Build a storage array with Elma’s 3U OpenVPX storage modules featuring high single slot data storage capacity. The 5332 hold 2 on-board SATA drives and can be part of a multi-slot storage array with 5330/31 or 5335/36 controller cards. -
Dual M.2 Card SSD Mezzanine Module
C48-M2 connects to the mezzanine expansion connector HSE of the CompactPCI® CPU carrier. 4HP envelope of the CPU carrier board, but can also be used on some mezzanine side cards, for an 8HP or 12HP total front panel width assembly. -
6U VME Storage Module, 3 Drives, 5050 / 5051
The 5050 is a 6U VME Storage Module with three 2.5” SSD in a single slot. Each SATA drive is accessible via front panel or RTM. Can be integrated into a multi-slot storage array using an external SATA RAID controller. -
6U VME Storage Module, Front Removable, 5055
The 5055 is a 6U VME SATA, dual front-removable storage module. Provides SATA I/O access for via a rear transition module. Can be integrated into a multi-slot storage array using an external SATA RAID controller. -
6U VPX Air Cooled Storage Module, 3 x 256GB MLC SSDs, 5650
The 5650 6U VPX Storage Module holds up to three 2.5” solid state or rotating hard drives in a single slot. This air-cooled version brings high capacity storage capability to rugged environments. -
3U OpenVPX Storage Boards
The 3VEST OpenVPX Storage Board can be used for 2x SATA (7mm height each), 1x NVMe + 1x SATA (7mm height each), 1x NVMe, 1x SATA. It is available as Air-cooled, front removable, conduction-cooled and rugged conduction cooled. -
3U CompactPCI Serial Front Removable SATA Carrier for SSDs
The SD8-STEEL is a peripheral slot card for CompactPCI® Serial systems. It includes a shuttle for 1.8 or 2.5” SSD or HDD drives. Signal integrity is optimized with 6Gbps SATA drivers. A push button ejection of the drive enables easy swap removal.
All Storage Modules
- Choosing a selection results in a full page refresh.